GLITTER PIGMENTS

Tips for using glitter in your project 

• Use fine polyester glitter for smooth, elegant shimmer (chunky glitter can look uneven).
• Paint over a similar-colored base coat — glitter looks best when the wall underneath is a complementary color (e.g. silver glitter over light gray, gold glitter over beige, etc.).
• Mix the glitter directly before painting, because it can settle to the bottom if left sitting
• Stir occasionally during painting to keep glitter suspended

 Polyester Glitter + Acrylic Medium (Glitter Paint)

Use for: wall art, wooden décor, paper, or canvas

Ingredients:

• 1 part polyester glitter
• 3–4 parts acrylic medium 
• Optional: a few drops of water if you need a thinner paint

Instructions:

1. Mix glitter and acrylic medium thoroughly in a small cup.
2. Brush on thin layers for a subtle sparkle or thicker coats for full coverage.
3. Let each coat dry fully before adding the next.
4. Seal with a clear varnish to prevent shedding.

 Result: a smooth, durable glitter finish that won’t flake off easily

 Polyester Glitter + Epoxy Resin (for Resin Art or Casting)

Use for: jewelry, coasters, tumblers, keychains, resin tables

Ingredients:

• 1 part glitter
• 8–10 parts mixed resin (by volume)

Instructions:

1.        Mix your epoxy resin and hardener per the manufacturer’s ratio.

2.        Stir in the glitter slowly to avoid bubbles.

3.        Pour into your mold or surface.

4.        Allow to cure fully (usually 24 hours).

 Tips:

• Fine glitter gives even shimmer; chunky glitter adds texture.
• Polyester glitter resists solvents, so it won’t dissolve or lose color in resin.

   

  Polyester Glitter + Clear Varnish like our Aqua varnish  (for Sealing Wood or Furniture)

  Use for: tabletops, furniture, décor

  Ingredients:

  • 1 teaspoon glitter per 2 oz (≈ 60 mL) of clear varnish 

  Instructions:

  1.        Mix thoroughly until the glitter is evenly suspended.

  2.        Brush or spray on thin coats.

  3.        Let each coat dry before the next to build depth.

  Result: hard, glossy surface with embedded sparkle.

  ---

   

  How to Use Polyester Glitter in Cement

  Option 1 – Surface Sprinkle Method (Best Results)

  1. Mix and pour your cement (like Cement All, mortar, or concrete).
  2. When it’s just starting to set — surface is firm but still slightly damp — sprinkle polyester glitter evenly across the surface.
  3. Gently press it in with a trowel or gloved hand.
  4. Let it cure normally.
  5. Once dry, seal it with a clear concrete sealer or epoxy topcoat — this locks in the glitter and restores shine.

  Advantages:

  • Glitter stays at the surface (visible and bright).
  • You can control sparkle density.
  • Minimal waste and dulling.

  ---

  Option 2 – Mixed-In Glitter (For Casting or Polished Pieces)

  1. Add 1–2 tablespoons of polyester glitter per 2 cups of dry mix (adjust depending on the look).
  2. Mix gently with dry cement first, then add water.
  3. Pour or cast as usual.
  4. Once cured, polish or sand the surface lightly to expose glitter.
  5. Seal with a clear acrylic or epoxy sealer to bring out shine.

  Works best for:
  Small decor pieces, stepping stones, terrazzo-style objects, tiles, planters, or countertops.