CLAY coating is a decorative coating, fine clay-based interior finish, with a slightly grainy appearance.
It creates a velvety, matte, fine texture if crushed with a stainless-steel trowel when drying.
It can be used in thick layers to smooth interior rustic surfaces. To prevent "tightening" of the coating when drying, apply with a stainless-steel trowel to achieve a smoother, elegant effect. Due to its breathability characteristics, the product is particularly suited to smoothing uneven surfaces in the application of lime-based finishes of the Colorare line.
- High environmental quality 100% Natural
- Suitable for interior walls only.
- Off-white powder form
- Tools can be cleaned with soap and water.
- VOC: 0.00 gms/liter.
- Coverage: 1.5 to 2 kg per m2
CLAY coating is available in the following colours (details below)
Preparing your surface: For previously painted surfaces, it is recommended to prepare the surface with TEXTURED base coat product before applying CLAY coating
Preparing & Mixing the CLAY coating: If adding pigment, add the dry pigment directly into the bucket. Dry mix the pigment with the clay powder until the components are mixed thoroughly. Add 30 to 35% clean water into the bucket and mix with a low-speed blender for a few minutes until a homogeneous dough is obtained. Prepare the product 1/2 hour before application.
Applying CLAY coating to your prepared surface: Apply using a stainless-steel trowel in two layers. Let each layer dry for 8-12 hours.
Made in Italy.
Colors shown are for information purposes only: Actual colors may vary from the color on your screen due to monitor differences.