NATURA - Mineral Paint & Primer

NATURA  is a water-based mineral paint and primer made with 95% natural ingredients. It gives interior walls and ceilings a smooth, even matte finish and can also be used as a primer under compatible decorative coatings, such as stucco. Apply with a brush or roller. 

How your colour arrives
When you choose a colour, you receive untinted liquid paint and the matching pigment in a separate package. Mix the pigment into the paint at home before applying. Choose Untinted to receive the paint on its own.

Colour Guide

• Untinted — Soft, near-neutral white.
• Buttermilk Matte — A very pale cream with gentle warmth.
• Stonewash Beige — A soft, sandy beige.
• Old Parchment — A light, muted beige with the warmth of aged paper.
• Greige Whisper — A soft grey-beige with a little more depth than Old Parchment.
• Ochre Dust — A muted golden beige, warmer and deeper than Stonewash Beige.
• Khaki Sand — An earthy khaki tan with golden-brown undertones.
• Blush Beige — A warm beige with a subtle peach undertone.
• Cloudstone — A light, near-neutral stone grey.
• Glacial Grey — A cool, muted blue-grey.
• Steel Horizon — A deep slate grey with a subtle cool undertone.
• Saffron Silk — A soft golden yellow ochre.
• Burnt Orange — A rich, earthy orange with a warm golden undertone.
• Tuscan Red — A muted brick red with a soft terracotta undertone.
• Silver Fern — A muted sage green with a silvery-grey undertone.
• Deep Fjord — A deep, smoky teal.

Coverage

Approximately 11–16 m²/L (115–170 ft²/L) per coat, depending on the surface’s condition and absorbency and the amount of water added.

Dilution

Add 30% water for the first coat and 25% for subsequent coats. For each litre of paint, that’s 300 mL of water for the first coat and 250 mL for subsequent coats.

Technical Information

• Suitable surfaces: Properly prepared plaster, drywall, concrete, and sound, dry, absorbent painted surfaces. Also suitable for interior decorative mouldings.
• Drying time: Dry to the touch in about 1 hour at 25°C and 65% relative humidity. Wait 4 hours between coats.
• Tool cleanup: Clean brushes and rollers with soap and water immediately after use.
• VOC content: 6.63 g/L for the Light base and 7.25 g/L for the Dark base.

• Finish care: Wipe gently with a soft, damp cloth. Avoid washing or scrubbing the painted surface.

Made in Italy