LIME PAINT - top coat & brick compatible
LIME PAINT is a Lime-based, 97% natural paint, for Interior and exterior use. Limewash paint - Limewash Finish.
PERFECT FOR BRICKS - read our blog
TECHNICAL INFORMATION
- A traditional Lime-based paint for interior and exterior surfaces
- Ideal for surfaces like bricks, drywall,
- High environmental quality
- Very high adhesive properties
- Semi creamy white when used has untinted but can be tinted with compatible Terrachrom pigment
- Brushes and tools can be cleaned with soap & water.
- VOC: 0.01 gms/L (due to lime content)
- Appropriate for Moisture & Mold control. Lime Paint allows the walls to breathe and is appropriate for humid interior walls.
-
Dilute with water, from 0 to 40%, according to the porosity of the surface and desired consistency. The more porous the surface, the more water needs to be added.
COVERAGE
Approximately 6-8 sq meters per litre* | 60-80 sq ft depending on the dilution and surface conditions.
*1 liter = 1.057 quart
APPLICATION
LIME PAINT for drywall, plaster, and previously painted walls
For drywall Application , a coat of TEXTURED lime paint and base coat need to be applied before applying the lime paint - top coat
The colours come with the required pigments to mix your colour at home. Simply follow the Coloration Guide.
Colour options shown below can be selected when ordering. Any colours of our Colour Chart can be used or if you would like a shade that is not include in our colour chart please select "Custom Colour" when you order and contact us via contact us.
PLEASE NOTE: We recommend using a primer before applying Terrachrom LIME PAINT to unpainted drywall or wall with patch work to make sure the joints are properly covered and do not "show" through. It also improves adherence for increased longevity. To obtain a limewash finish , Apply one coat of TEXTURED lime paint & base coat and 1 to 2 coat of terrachrom LIME PAINT (depending on the color). For more information see our Surface Preparation and Application Guide under TIPS or scroll for TIPS below.
LIME PAINT for brick & stone walls, fireplaces & exterior façades
Read our blog about Lime paint for brick: USE LIME PAINT FOR BRICK and give your façade and your home a new authentic look
If the bricks/stones are previously painted/treated (with a product other than lime), we recommend using our TEXTURED PRIMER primer before applying LIME PAINT. If untreated/unpainted, terrachrom LIME PAINT can be applied directly. Both products are suitable for exterior/interior brick/stone.
terrachrom LIME PAINT can be wiped/brushed or washed off with water (or a vinegar & water solution) immediately after application. With the use of a pressure washer, the entire application can be removed up to 2 days following the initial application.
If you wish to expose some of the brick or stone, start wiping/washing off some of the limewash when it is still wet, approximately 30 minutes after application, depending on climatic conditions. Start removing earlier if exposed to sun and high temperatures.
As the paint will not appear fully opaque initially, it is important to wait for the paint to be fully dry before assessing its final color and opacity. Unlike other paints, limewash penetrates the surface and the color & opacity can be built up by applying successive coats. Limewash creates a very durable finish that will not peel or chip off over time.
As long as the paint is applied during proper weather - 3 days without rain, a minimum of 1 week before or after the last frost and appropriate temperatures for application (between 7°C and 27°C (45°F and 80°F)) - the limewash paint will last approximately five years. After five years, the color remains but may begin to patina from climatic conditions which yields a beautiful weathered finish that can last decades.
Certification Excell Zone Verte - NIVEAU GOLD Guarantees premium interior air quality.
Technical Data Sheet Safety Data Sheet
MADE IN ITALY
