LIME PAINT - Top Coat

LIME PAINT is a lime-based, 97% natural paint suitable for both interior and exterior surfaces. Creates a classic limewash finish.

Perfect for brick — explore our blog to learn more.

TECHNICAL INFORMATION

• Traditional lime-based paint for interior and exterior surfaces
• Suitable for a wide range of substrates, including brick and drywall
• High environmental quality & naturally mold- and moisture-resistant
• Excellent adhesion
• Dries to a semi-creamy white when untinted; can be tinted with Terrachrom pigments
• Tools clean easily with soap and water
• VOC: 0.01 g/L (naturally low due to lime content)
• Breathable finish helps regulate humidity and reduce mold growth

Dilution:
Dilute with 0–40% water, depending on the porosity of the surface and the desired consistency.

More porous surfaces require more water.

COVERAGE

Approximately 6-8 m² per litre* | 60-80 ft² depending on the dilution and surface conditions.

*1 liter = 1.057 quart

COLOUR SELECTION

Your paint order includes the required pigments for mixing your chosen colour at home—just follow our Colouration Guide.

You can select any of the colours shown on this page, or another Terrachrom colour from our full Colour Chart. For custom shades, choose “Custom Colour” at checkout and Contact Us with your reference.

APPLICATION

LIME PAINT on Drywall, Plaster, and Previously Painted Walls

For drywall applications, a Textured Lime Paint (base coat) must be applied before the Lime Paint topcoat.

This base coat helps ensure even coverage, hides joints and patchwork, and improves adhesion for a longer-lasting finish. Following the base coat, apply one or two coats of Terrachrom Lime Paint (depending on the desired colour/coverage) for a traditional limewash look.

See our Surface Preparation and Application Guide under for detailed instructions.

LIME PAINT for brick & stone walls, fireplaces & exterior facades

Terrachrom LIME PAINT is suitable for both interior and exterior brick and stone surfaces.

For inspiration, see our blog post here

Surface Preparation

• Previously painted or treated brick/stone: Apply one coat of our Textured Lime Paint (base coat) before using Terrachrom LIME PAINT.

• Untreated, unpainted brick/stone: Apply Terrachrom LIME PAINT directly—no primer required.

Adjusting the Limewash Finish

Terrachrom LIME PAINT can be partially removed to create an aged or exposed look. To expose brick/stone, begin wiping or gently washing the surface with water approximately 30 minutes after application—earlier in hot or sunny conditions.

If necessary, full removal can be accomplished with a pressure washer within 48 hours of application. 

Note: Limewash appears more translucent when wet. Always allow the surface to dry completely before evaluating colour and opacity. The finish can be built up with successive coats.

Durability & Weather Conditions

LIME PAINT creates a long-lasting, mineral bond that will not peel or chip.
For best results:

• Apply only in dry weather with no rain for at least 3 days.

• Use when temperatures are between 7°C and 27°C (45°F–80°F).

• Avoid applying within 1 week before or after frost.

With proper application, the finish will last about five years. After that, the colour softens into a natural patina that can remain beautiful for decades.

Technical Data Sheet   Safety Data Sheet 

MADE IN ITALY